Yamaha is famous to make excellent audio reproduction components. The incredible sound and ambiance developed by an excellent Yamaha receiver and speakers should be felt and heard to be believed. However, to obtain the most useful performance from your own Yamaha home stereo, it should be put up precisely.
Gauge the distance from where you will place the Yamaha receiver to where in fact the speakers will undoubtedly be. Ideally, each tower speaker is going to be along a horizontal line 3 to 6 feet left and right of the receiver permanently stereo imaging. Both speakers should be placed symmetrically. Place the speakers within their measured locations and cut your speaker wire with wire cutters to the measurements obtained in 2. Add six to eight inches to each wire so you have a little bit of extra wire to utilize. Use wire strippers to get rid of approximately 0. 25 inches of the plastic sheath from the negative and positive leads of the speaker wire on both ends. Next, attach the positive result in the positive terminal of every speaker, and the negative result in the negative terminal. Examine the rear of the Yamaha stereo receiver and locate the left and right channel output terminals. They'll be spring-loaded, clip-type terminals which are red or black in color. Red indicates positive polarity and black indicates negative polarity. Connect the speakers to the best and left channel speaker outputs of the stereo receiver. The speaker to your right when you're seated may be the right channel, and speaker to your left may be the left channel. Ensure that you take notice of the proper polarity. Connect positive to negative and positive to negative for every channel, just like you did for the speakers. Make sure your connections and power on the stereo receiver. Test thoroughly your stereo setup by playing a CD and checking that sound is output to each speaker.
没有评论:
发表评论